1987 Acura Integra Speaker Sizes
The 1987 Acura Integra factory audio system features locations where the front door panel and rear side panel accommodate 6.5 inch speakers. Midbass and full-range units serve as a viable replacement or upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 6.5 | Midbass / Full-Range |
|
1987 Acura Integra Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 0 Low: 11987 Acura Integra Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1987 Acura Integra accommodates 6.5-inch speakers in both front door panels and rear side panels, with compatibility for midbass or full-range driver types in all four locations.
- Factory speaker locations may benefit from replacement with aftermarket units that offer higher sensitivity ratings and improved frequency response across the audible spectrum.
- Full-range speakers provide single-driver coverage of most audible frequencies, while midbass drivers typically focus on reproducing lower midrange and upper bass frequencies between approximately 80Hz and 3kHz.
- The identical 6.5-inch sizing across front and rear locations allows for consistent driver selection when planning a four-speaker installation configuration.
- Aftermarket speakers with higher power handling capabilities may produce greater output levels compared to original equipment drivers, though amplifier power should be considered when matching components.
- Midbass drivers often pair with separate tweeters in component speaker systems, potentially offering improved stereo imaging and high-frequency extension over full-range alternatives.
- The single DIN radio opening provides standard depth for head unit installation without requiring extensive dash modification for aftermarket receivers.
- Speaker mounting depth and magnet clearance should be verified against door panel cavity dimensions to avoid interference with window mechanisms or panel reinstallation.