1993 Acura Integra Speaker Sizes
The 1993 Acura Integra factory audio system locations feature specific configurations. Front door panels and rear side panels accommodate 6.5 inch speakers, while the rear deck lid supports 6x9 inch units. Midbass and full-range units serve as viable replacement and upgrade options for the vehicle audio architecture.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
| Rear Side Panel | 6.5 | Midbass / Full-Range |
|
1993 Acura Integra Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 1 Low: 11993 Acura Integra Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1993 Acura Integra features three distinct speaker locations, with the front door panels and rear side panels accepting 6.5 inch drivers while the rear deck lid accommodates 6x9 inch units.
- Both midbass and full-range speaker types fit the front door and rear side panel positions, providing flexibility in component selection based on the desired audio system configuration.
- The rear deck lid location exclusively supports full-range speakers in the 6x9 inch format, which typically handle a broader frequency spectrum compared to dedicated midbass drivers.
- Replacing the factory speakers in the 1993 Acura Integra could begin with the rear deck position, as the larger 6x9 inch full-range speakers generally produce more output and bass response than the 6.5 inch positions.
- The front door panel speakers often receive upgrade priority in many installations because they sit closer to the listening position and can provide more direct sound staging when paired with appropriate amplification.
- Full-range speakers in the 6.5 inch positions would handle all frequencies without requiring additional components, while midbass speakers would necessitate separate tweeters or other high-frequency drivers for complete audio coverage.
- The availability of both single DIN and double DIN radio compatibility suggests the head unit opening can accommodate aftermarket receivers of either size, potentially enabling integration with amplifiers and signal processors for enhanced speaker performance.
- Sound improvement from aftermarket speakers in these positions would likely be most noticeable in clarity, power handling, and frequency extension compared to the original equipment, particularly when matched with appropriate power delivery.