1995 Acura NSX Speaker Sizes
The 1995 Acura NSX factory audio system features specific mounting locations for various audio components. Front door panels accommodate 5.25 inch speakers, and the rear deck lid supports a 6.5 inch speaker size. Midbass and full-range units serve as viable options for an acoustic replacement and upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1995 Acura NSX Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01995 Acura NSX Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1995 Acura NSX utilizes different speaker sizes between front and rear locations, with 5.25-inch units in the door panels and larger 6.5-inch components in the rear deck lid. This size variation suggests the factory audio design may have distributed frequency ranges across locations to optimize cabin acoustics.
- Both front and rear positions accept either midbass or full-range speaker types, which provides flexibility when selecting replacement components. Midbass drivers typically focus on reproducing lower mid-frequencies and upper bass, while full-range speakers attempt to cover a broader frequency spectrum without dedicated tweeters.
- The rear deck lid location in the 1995 Acura NSX accommodates the larger 6.5-inch format, which generally allows for greater cone surface area and potentially improved bass response compared to the smaller front drivers. This configuration might indicate the rear position was intended to provide more low-frequency support in the original design.
- Replacement speakers would need to match the specific size requirements for each location, as the 5.25-inch and 6.5-inch formats are not interchangeable without modification. The compatible type designations suggest that aftermarket options could range from dedicated midbass components paired with separate tweeters to simpler full-range coaxial designs.
- The single DIN radio specification indicates a standard head unit form factor that measures approximately 2 inches in height, which was common during this production period and remains compatible with many aftermarket receivers. This standardized sizing simplifies potential audio system upgrades while maintaining original dashboard integration.