1991 Audi 100 Speaker Sizes

The 1991 Audi 100 factory audio system features a dashboard that accommodates 4 inch speakers, and the rear deck lid can accept a 6.5 inch speaker size. Midrange, midbass, and full-range units serve as compatible speaker types for a replacement and audio upgrade.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Dashboard 4 Midrange
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Rear Deck Lid 6.5 Midbass / Full-Range
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low

1991 Audi 100 Speaker Replacement Summary

2 total positions
1 easy to replace
0 high priority
0 professional only

Replacement difficulty:

Low: 1 Medium: 1 High: 0

Replacement priority:

High: 0 Medium: 2 Low: 0

1991 Audi 100 Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN 7"×2" 180×50 Standard size for basic car radios with small display or no display
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 1991 Audi 100 front dashboard positions house 4-inch midrange speakers, which typically handle mid-frequency audio reproduction between approximately 300Hz and 5kHz, leaving bass frequencies to dedicated components elsewhere in the audio system.
  • Rear deck lid locations in the 1991 Audi 100 accommodate 6.5-inch speakers that can function as either midbass drivers or full-range units, with the midbass configuration generally providing stronger low-frequency output when paired with separate tweeters.
  • The larger 6.5-inch rear speakers may warrant replacement priority over the smaller front units when considering system-wide sound quality improvements, as they contribute more substantially to overall bass response and sound stage depth.
  • The 4-inch front midrange speakers likely require aftermarket options specifically designed for midrange duty rather than full-range speakers, which could result in tonal imbalance if components are not properly matched to their intended frequency range.
  • The single DIN radio opening suggests compatibility with a wide variety of aftermarket head units, potentially enabling power and signal quality improvements that would complement upgraded speaker installations throughout the vehicle.
  • Full-range 6.5-inch speakers in the rear deck location would handle frequencies from bass through treble independently, while midbass-designated drivers would necessitate additional high-frequency components for complete audio coverage in the rear sound stage.