1984 Audi 5000 Speaker Sizes
The 1984 Audi 5000 factory audio system features a dashboard that accommodates a 4 inch speaker size, while the rear deck lid supports 6.5 inch units. Compatible replacement and upgrade speaker types include midrange, midbass, and full-range options.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4 | Midrange |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1984 Audi 5000 Speaker Replacement Summary
2
total positions
1
easy to replace
0
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 0 Medium: 2 Low: 01984 Audi 5000 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1984 Audi 5000 dashboard locations accommodate 4 inch midrange speakers, which would typically handle vocal frequencies and mid-frequency reproduction rather than the full audio spectrum.
- Rear deck lid positions accept 6.5 inch speakers that can function as either midbass units or full-range drivers, suggesting flexibility in component selection based on the desired system configuration.
- The factory 4 inch dashboard speakers likely represent the primary listening position speakers, though their midrange-only designation indicates limited bass response without additional components.
- Upgrading the rear deck speakers with 6.5 inch midbass drivers could enhance lower frequency output, particularly if paired with the dashboard midrange speakers in a component-style setup.
- The single DIN radio opening provides standard aftermarket head unit compatibility, which may be relevant when considering amplification requirements for upgraded speakers.
- Full-range 6.5 inch speakers in the rear deck positions could operate independently without additional crossovers, though this configuration might create frequency overlap with the dashboard midrange units.
- The speaker size difference between front and rear locations suggests a factory design that separated frequency responsibilities across the available mounting points.