2014 Audi A6 Speaker Sizes

The 2014 Audi A6 factory audio system utilizes specific locations for acoustic drivers. Front door panels and rear door panels accommodate 4 inch speakers and 6.5 inch units, while center dash and dashboard locations accept a 3.5 inch speaker size alongside 1 inch components. Rear deck lid areas support 1 inch and 10 inch drivers. Compatible speaker types for replacement and upgrade include tweeter, full-range, midrange, midbass, and subwoofer units.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Center Dash 1 Tweeter
  • Requires dashboard disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Center Dash 3.5 Full-Range
  • Requires dashboard disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Dashboard 1 Tweeter
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 4 Midrange
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Front Door Panel 5.25 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Deck Lid 1 Tweeter
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low
Rear Deck Lid 10 Subwoofer
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low
Rear Door Panel 0.75 Tweeter
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2014 Audi A6 Speaker Replacement Summary

9 total positions
6 easy to replace
2 high priority
0 professional only

Replacement difficulty:

Low: 6 Medium: 3 High: 0

Replacement priority:

High: 2 Medium: 7 Low: 0

2014 Audi A6 Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2014 Audi A6 incorporates a multi-driver speaker configuration with tweeters positioned in four distinct locations: center dash, dashboard, rear deck lid, and rear door panels, suggesting a factory emphasis on high-frequency dispersion throughout the cabin.
  • Front door panel installations may accommodate a three-way component approach, with dedicated 4-inch midrange drivers handling vocal frequencies alongside 5.25-inch midbass or full-range units for lower frequency reproduction.
  • The rear deck lid houses both a 1-inch tweeter and a 10-inch subwoofer, indicating a factory configuration that places bass reinforcement in the trunk area rather than under seating positions.
  • Replacement priority could focus on the front door panel speakers first, as the 5.25-inch midbass units and 4-inch midrange drivers handle the majority of frequency content in the critical listening position.
  • The 6.5-inch rear door speakers accept either midbass or full-range replacements, offering flexibility for those who prefer dedicated midbass support or simplified two-way systems in the rear soundstage.
  • The center dash 3.5-inch full-range speaker likely serves as a center channel in the factory audio system, contributing to vocal clarity and front-stage imaging width.
  • Aftermarket component speaker systems with separate tweeters, midrange, and midbass drivers would align well with the existing multi-location architecture, potentially improving tonal separation without requiring structural modifications.
  • Sound improvement might be most noticeable when upgrading the front door 5.25-inch and 4-inch drivers together, as this addresses the primary frequency range where human hearing is most sensitive.
  • The radio opening supports both single DIN and double DIN head units, allowing for receiver upgrades that can provide additional amplification or signal processing to support higher-performance replacement speakers.