2013 Cadillac ATS Speaker Sizes
A speaker size chart for the 2013 Cadillac ATS provides factory specifications and locations for audio system components. Information covers replacement options for front door panel and rear door panel speakers. Details support aftermarket upgrade planning by listing OEM speaker specifications installed at each location within the audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2013 Cadillac ATS Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02013 Cadillac ATS Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Cadillac ATS uses 6.5 inch speakers in both front and rear door panels, suggesting a uniform speaker platform across all door positions that may simplify replacement planning when addressing multiple locations simultaneously.
- Both door panel locations accept midbass or full-range speaker types, indicating flexibility in component selection based on whether the system retains factory amplification or transitions to aftermarket signal processing.
- Midbass drivers in these positions would typically handle frequencies from roughly 80-100 Hz up to a crossover point around 3-4 kHz, relying on separate tweeters for high-frequency reproduction in a component setup.
- Full-range speakers would attempt to cover the entire audible spectrum from a single cone, potentially offering simpler installation without additional tweeter mounting requirements but generally with reduced high-frequency extension compared to dedicated tweeters.
- The single DIN radio opening may limit head unit selection to smaller form factors or require additional mounting hardware for double DIN touchscreen units if display integration becomes a consideration during audio upgrades.
- Door panel speakers often represent the primary sound source in factory systems, meaning replacement at these locations could produce noticeable changes in tonal balance and output capability before addressing other potential speaker positions.
- The 6.5 inch size typically allows for cone area sufficient to move air volumes necessary for midbass punch, though actual low-frequency extension depends heavily on door panel volume, sealing quality, and speaker parameters like free-air resonance and excursion limits.
- Mounting depth and magnet clearance behind the door panel would need verification during installation, as aftermarket speakers often feature larger motor structures than factory units, potentially creating interference with window mechanisms or door frame components.