1987 Cadillac Brougham Speaker Sizes
The 1987 Cadillac Brougham factory audio system features a front door panel location that accommodates a 5.25 inch speaker size, and a rear deck lid location that supports 6x9 inch units. Compatible speaker types for a replacement and upgrade include midbass and full-range options.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1987 Cadillac Brougham Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01987 Cadillac Brougham Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1987 Cadillac Brougham utilizes a 5.25 inch speaker opening in the front door panels, which accommodates either midbass drivers or full-range speakers depending on system configuration preferences.
- Full-range speakers would handle the entire frequency spectrum in the front locations, while midbass drivers would require separate tweeters or component system integration for high-frequency reproduction.
- The rear deck lid positions accept 6x9 inch speakers designated for full-range operation, providing coverage across bass, midrange, and treble frequencies from a single speaker unit.
- This oval 6x9 format typically offers greater cone surface area compared to round speakers of similar mounting depth, potentially contributing to enhanced low-frequency output in the rear soundstage.
- Aftermarket speaker selection for the 1987 Cadillac Brougham would benefit from consideration of sensitivity ratings, as factory head units often provide limited power output compared to aftermarket amplification solutions.
- Component speaker systems in the front doors could provide improved stereo imaging and frequency response compared to coaxial full-range alternatives, though installation complexity increases with separate crossover networks.
- The Single DIN radio opening maintains standardized dimensions for head unit replacement, allowing integration of aftermarket source units with enhanced features such as digital signal processing or increased preamp voltage.
- Sound quality improvements might be observed through replacement of factory speakers with aftermarket options featuring higher-grade materials such as polypropylene cones, butyl rubber surrounds, or silk dome tweeters in coaxial designs.
- Power handling specifications of replacement speakers should align with available amplifier output to prevent thermal damage or mechanical failure from overpowering or underpowering the transducers.
- The combination of front 5.25 inch and rear 6x9 inch speakers creates a mixed-size configuration that may require attention to frequency response overlap and relative output levels during system balancing.