2014 Chevrolet Traverse Speaker Sizes
The 2014 Chevrolet Traverse factory audio system features specific mounting locations across the interior cabin. The a-pillar accommodates a 1 inch speaker size, while the center dash and rear side panel accept 3.5 inch units. Furthermore, the front door panel and rear door panel support 6.5 inch speakers. Compatible speaker types for a replacement and upgrade include tweeter, full-range, midrange, and midbass.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Center Dash | 3.5 | Full-Range |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 3.5 | Midrange |
|
2014 Chevrolet Traverse Speaker Replacement Summary
5
total positions
2
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 2 High: 1Replacement priority:
High: 1 Medium: 2 Low: 2Additional Notes
- The front door panel positions in the 2014 Chevrolet Traverse carry 6.5 inch drivers rated for midbass or full-range operation, which suggests they may handle a relatively wide portion of the audible frequency spectrum compared to the smaller locations elsewhere in the vehicle.
- The rear door panels share the same 6.5 inch sizing and compatible driver types as the front door panels, which could indicate a degree of symmetry in the original speaker layout between front and rear staging.
- The A-pillar positions are sized at 1 inch and are limited to tweeter-type drivers, suggesting these locations are likely dedicated to high-frequency reproduction only and would not be suitable for broadband or low-frequency drivers.
- The center dash and rear side panel positions both measure at 3.5 inches, though their compatible driver types differ, with the center dash supporting full-range drivers and the rear side panel supporting midrange drivers, which may reflect differing acoustic roles within the cabin.
- Given that the front door panel locations accommodate the largest driver size and the broadest compatible type range, those positions may tend to receive higher replacement priority when addressing overall system output or frequency coverage.
- The presence of a dedicated tweeter position at the A-pillar, alongside full-range or midbass-capable door panel locations, might suggest the factory layout was arranged with some degree of frequency division in mind across the cabin.
- A midrange-only designation at the rear side panel position could indicate that drivers installed there may be expected to operate within a narrower frequency band, possibly between roughly 300 Hz and 5 kHz depending on the driver's characteristics.