2015 Chrysler Town & Country Speaker Sizes

The 2015 Chrysler Town & Country factory audio system features specific mounting locations for various audio components. Center dash and dashboard accept 3.5 inch speakers. Front door panel, rear, and rear door panel accommodate 6x9 inch units, while d-pillar supports a 1 inch speaker size and rear accepts an 8 inch unit. Compatible speaker types for a replacement or upgrade consist of tweeters, full-range drivers, and subwoofers.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Center Dash 3.5 Full-Range
  • Requires dashboard disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
D-Pillar 1 Tweeter
  • Extremely difficult access
  • Professional service only
  • Low replacement priority
  • Replacement difficulty: high
Dashboard 3.5 Full-Range
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 6x9 Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear 8 Subwoofer
  • Secondary sound location
  • Medium replacement priority
  • Replacement difficulty: medium
Rear 6x9 Full-Range
  • Secondary sound location
  • Medium replacement priority
  • Replacement difficulty: medium
Rear Door Panel 6x9 Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2015 Chrysler Town & Country Speaker Replacement Summary

7 total positions
2 easy to replace
1 high priority
1 professional only

Replacement difficulty:

Low: 2 Medium: 4 High: 1

Replacement priority:

High: 1 Medium: 5 Low: 1

2015 Chrysler Town & Country Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2015 Chrysler Town & Country features a multi-location speaker configuration with varying sizes that suggests a distributed sound system design throughout the cabin.
  • The D-pillar location contains 1-inch tweeters, which typically handle high-frequency reproduction in the upper rear areas of the vehicle.
  • Three separate locations utilize 3.5-inch full-range speakers, positioned in the center dash and dashboard areas, likely contributing to frontal soundstage width and clarity.
  • The most common speaker size in this configuration is 6x9 inch, appearing in front door panels, rear door panels, and an additional rear location, totaling at least three mounting positions.
  • The 6x9 inch form factor generally provides fuller midrange response and stronger bass output compared to smaller circular speakers, which may be why this size was selected for multiple door locations.
  • An 8-inch subwoofer is specified for a rear location, suggesting a factory-installed option for enhanced low-frequency extension beyond what the 6x9-inch speakers can provide.
  • Replacing the front door panel 6x9 speakers could yield noticeable sound quality improvements, as these locations typically contribute most directly to the listening experience in front seating positions.
  • The combination of tweeters, full-range drivers, and a dedicated subwoofer indicates a factory system designed to cover the full audio frequency spectrum from multiple angles.
  • The radio supports both single DIN and double DIN configurations, allowing for flexibility in aftermarket head unit upgrades without structural modifications.
  • Upgrading the 3.5-inch dashboard speakers might improve vocal clarity and center imaging, though their smaller size inherently limits low-frequency capability.