2013 Dodge Challenger Speaker Sizes
The 2013 Dodge Challenger factory audio system includes specific mounting locations. Front door panels accommodate 6x9 inch speakers, while the rear deck lid accommodates a 5.25 inch speaker size. Compatible speaker types for replacement and upgrade projects consist of midbass and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6x9 | Full-Range |
|
| Rear Deck Lid | 5.25 | Midbass / Full-Range |
|
2013 Dodge Challenger Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02013 Dodge Challenger Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Dodge Challenger utilizes two distinct speaker sizes across its audio system, with 6x9 inch units mounted in the front door panels and smaller 5.25 inch speakers positioned in the rear deck lid.
- Front door panel speakers accept full-range drivers in the 6x9 inch format, which typically provide broader frequency response compared to the rear deck lid positions that accommodate either midbass or full-range 5.25 inch units.
- The rear deck lid positions may benefit from midbass-focused replacements rather than full-range alternatives, as the 5.25 inch size naturally emphasizes lower-midrange frequencies when properly powered.
- Upgrading the front door panel speakers could yield more noticeable sound improvement due to their larger 6x9 inch size and proximity to occupants, though the rear deck lid positions contribute to overall soundstage depth.
- Both single DIN and double DIN head units remain compatible with the factory radio opening, providing flexibility for aftermarket receiver installations that could better drive replacement speakers.
- The 6x9 inch front position represents a common oval format that allows greater cone area than traditional round speakers, potentially offering increased output and bass response within door panel constraints.
- Replacement speakers for the rear deck lid should account for the 5.25 inch mounting requirements, as this size differs from the front positions and limits interchangeability between speaker locations.