1986 Dodge Colt Speaker Sizes
The 1986 Dodge Colt factory audio system locations include a dashboard that accommodates a 4 inch speaker size, front door panels that accept 5.25 inch units, and a rear deck lid supporting 6.5 inch speakers. Compatible speaker types for a system replacement and upgrade consist of midrange, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4 | Midrange |
|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1986 Dodge Colt Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 01986 Dodge Colt Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1986 Dodge Colt presents three distinct speaker locations with varying sizes, suggesting a tiered approach to replacement based on listener priorities and acoustic goals.
- Dashboard speakers at 4 inches accommodate midrange drivers, which handle vocal frequencies and instrumental presence zones typically between 300Hz and 5kHz.
- Front door panels accept 5.25-inch speakers compatible with either midbass or full-range designs, offering flexibility in system configuration depending on whether dedicated tweeters are incorporated elsewhere.
- Rear deck lid positions support 6.5-inch speakers, representing the largest mounting area in the 1986 Dodge Colt and potentially providing greater bass extension compared to smaller locations.
- The size progression from 4-inch to 6.5-inch speakers across locations may enable frequency distribution strategies where larger drivers handle lower frequencies while smaller units focus on midrange reproduction.
- Midbass speakers typically emphasize frequencies from roughly 80Hz to 500Hz, while full-range designs attempt broader coverage from bass through treble regions within physical and acoustic constraints.
- The single DIN radio opening accommodates standard head units measuring approximately 2 inches tall by 7 inches wide, compatible with most aftermarket receivers featuring contemporary connectivity options.
- Replacing factory speakers with aftermarket components may improve tonal accuracy, dynamic range, and power handling compared to original equipment, though results depend on specific product selection and installation quality.
- The dashboard midrange position might benefit from speakers with enhanced sensitivity ratings to compensate for the smaller cone area and limited low-frequency output inherent to 4-inch drivers.
- Front door speaker selection between midbass and full-range types influences whether additional tweeters become necessary for high-frequency extension above 4kHz to 5kHz.