1987 Dodge Daytona Speaker Sizes
The 1987 Dodge Daytona factory audio system features specific mounting locations containing compatible hardware. The dashboard accommodates 3.5 inch speakers, the front door panel accommodates 5.25 inch speakers, and the rear door panel accommodates a 5x7 inch speaker size. Component choices for system replacement and upgrade include full-range and midbass configurations.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 3.5 | Full-Range |
|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Door Panel | 5x7 | Full-Range |
|
1987 Dodge Daytona Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 01987 Dodge Daytona Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1987 Dodge Daytona features three distinct speaker locations with varying sizes, suggesting a factory audio configuration that distributed sound across different cabin zones rather than concentrating output in a single area.
- Dashboard positions accommodate 3.5 inch full-range speakers, which typically handle mid and high frequencies but may lack low-frequency response due to their limited cone area and shallow mounting depth.
- Front door panels accept 5.25 inch speakers with compatibility for both midbass and full-range designs, offering flexibility between dedicated bass reproduction or single-driver frequency coverage depending on system goals.
- Rear door positions utilize 5x7 inch oval speakers limited to full-range types, providing greater surface area than the dashboard units while fitting the elongated mounting footprint common in rear door installations of this era.
- Prioritizing front door speaker replacement could yield more substantial sound quality gains given their larger size and midbass capability compared to the smaller dashboard units.
- The single DIN radio opening follows period-standard head unit sizing, allowing straightforward aftermarket receiver installation without dashboard modification or adapter complexity.
- Upgrading to component speakers in the front doors might require separating tweeters to alternate locations since the 5.25 inch opening would house only the woofer portion of such a system.
- The three-way speaker size variation may present tonal balance challenges when mixing different replacement speaker models, as sensitivity and frequency response characteristics could vary significantly across locations.
- Coaxial full-range speakers in the rear 5x7 positions could provide adequate fill sound while keeping primary listening focus on the front stage during incremental system upgrades.
- Shallow-mount speaker designs might prove necessary for all locations depending on door panel thickness and dashboard cavity depth constraints typical of vehicles from this manufacturing period.