2013 Dodge Durango Speaker Sizes
The 2013 Dodge Durango speaker size chart details factory audio specifications for replacement or aftermarket upgrade purposes. Information covers speaker locations including dashboard, front door panel, and rear door panel positions. Data encompasses factory speaker specifications to facilitate proper aftermarket component selection for system audio enhancement.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 3.5 | Full-Range |
|
| Front Door Panel | 6x9 | Full-Range |
|
| Rear Door Panel | 6.75 | Midbass / Full-Range |
|
2013 Dodge Durango Speaker Replacement Summary
3
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 2 Low: 02013 Dodge Durango Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels of the 2013 Dodge Durango accommodate 6x9 inch full-range speakers, which tend to be prioritized in aftermarket installations due to their larger surface area and potential for improved mid-range and bass response compared to the smaller dashboard units.
- Dashboard speakers in this configuration use 3.5 inch full-range drivers, which typically handle higher frequencies and contribute to soundstage width but may be limited in lower frequency reproduction capabilities.
- Rear door panel locations support 6.75 inch speakers that can be configured with either midbass or full-range drivers, potentially allowing for dedicated bass handling if a component system is installed in the 2013 Dodge Durango.
- The dual compatibility options for rear speakers suggest flexibility in sound system design, where midbass drivers could be paired with separate tweeters for improved frequency separation.
- Radio compatibility with both single DIN and double DIN head units may provide options for upgrading audio source equipment alongside speaker replacements, though installation requirements would differ between the two formats.
- The combination of three different speaker sizes across dashboard and door locations suggests a factory audio design that distributes frequency ranges spatially throughout the cabin rather than using uniform speaker sizing.