1991 Dodge D/W Series (Pickups) Speaker Sizes
The 1991 Dodge D/W Series (Pickups) speaker size chart details factory audio system specifications and locations for replacement or aftermarket upgrade purposes. Information covers speaker specifications in two positions: behind seat and front door panel locations. Data enables identification of compatible aftermarket speakers based on factory audio system configurations.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Behind Seat | 4x10 | Full-Range |
|
| Front Door Panel | 6x9 | Full-Range |
|
1991 Dodge D/W Series (Pickups) Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 1 Low: 0Additional Notes
- The 1991 Dodge D/W Series Pickups carries two distinct speaker locations, each with different sizing requirements, which may suggest that replacement priority could vary depending on which position shows wear or degradation first.
- The behind-seat position calls for a 4x10 inch full-range driver, a less common sizing that could potentially limit the number of compatible aftermarket options available on the market.
- The front door panel position accommodates a 6x9 inch full-range speaker, a sizing that tends to have wider aftermarket support and may allow for more cone surface area relative to the behind-seat unit.
- Both positions are listed as full-range compatible types, which could indicate that each location is intended to handle the full audio frequency spectrum independently, rather than relying on a dedicated multi-component setup.
- The size difference between the two positions suggests that the front door panel speakers may offer a broader low-frequency response due to their larger overall surface area compared to the behind-seat units.
- Since both locations use full-range drivers, any noticeable improvement in audio output would likely depend on the sensitivity rating and frequency response characteristics of the replacement units selected for each position.