2000 Dodge Intrepid Speaker Sizes
The 2000 Dodge Intrepid speaker size chart provides factory speaker specifications for replacement or aftermarket audio system upgrades. Information includes speaker locations in the front door panel and rear deck lid, along with details on specifications needed for installing aftermarket speakers to replace factory audio components.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
2000 Dodge Intrepid Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02000 Dodge Intrepid Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2000 Dodge Intrepid front door panels accommodate 6.5-inch speakers, which typically serve as the primary sound source for the front audio stage. These locations can accept either midbass drivers or full-range speakers depending on the desired audio configuration.
- Rear deck lid positions accept 6x9-inch full-range speakers, providing a larger cone area than the front door speakers. This size difference may contribute to enhanced lower frequency response from the rear audio stage.
- Replacing factory speakers with aftermarket components in the front doors might yield more noticeable improvements in clarity and detail, as this location sits closer to the listening position than the rear deck.
- The single DIN radio specification indicates standard head unit compatibility, potentially limiting integration options compared to double DIN configurations but maintaining straightforward replacement procedures.
- Full-range speaker compatibility in both front and rear positions suggests the factory system likely operates without external crossovers or separate tweeters, making component speaker installations an option for enhanced high-frequency performance.
- The 6x9-inch rear speakers offer approximately 58.5 square inches of cone area, while 6.5-inch front speakers provide roughly 33.2 square inches, creating a rear-biased surface area ratio that may affect overall tonal balance.