1982 Dodge Omni Speaker Sizes
The 1982 Dodge Omni speaker size chart provides factory and aftermarket audio system specifications for replacement or upgrade purposes. Information includes speaker locations in front door panels and rear areas. Data covers standard factory speaker sizes and compatible aftermarket options for each position within the vehicle audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear | 6.5 | Midbass / Full-Range |
|
1982 Dodge Omni Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01982 Dodge Omni Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1982 Dodge Omni front door panels accommodate 5.25-inch speakers, which may serve as the primary sound source in many factory configurations and often receive priority consideration during audio system upgrades.
- Rear positions accept 6.5-inch speakers, providing a larger cone area compared to the front locations, which could contribute to enhanced bass response and overall sound pressure levels when replacing factory units.
- Both front and rear locations support midbass drivers, which typically handle frequencies in the critical midrange and lower bass regions, potentially offering improved vocal clarity and musical fullness over basic full-range designs.
- Full-range speakers remain compatible with both positions, allowing for straightforward replacements without requiring additional components like crossovers or separate tweeters.
- The size difference between front and rear speakers suggests a staggered configuration that may help distribute sound frequencies more evenly throughout the cabin space.
- Component speaker systems could be installed in either location, though the larger 6.5-inch rear openings might provide additional flexibility for certain tweeter mounting options or larger magnet structures.
- The single DIN radio opening follows standard specifications that accept a wide range of aftermarket head units without requiring dash modifications or adapter kits beyond basic wiring harnesses.
- Upgrading to speakers with higher sensitivity ratings in these positions could produce noticeable volume increases even with the factory radio, as the same power input would generate greater acoustic output.