1985 Dodge Ram 50 Speaker Sizes
The 1985 Dodge Ram 50 factory audio system features specific location configurations. The front door panel accommodates 6x9 inch units, and the rear accepts an 5.25 inch speaker size. Compatible speaker types for a replacement upgrade include midbass and full-range options.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6x9 | Full-Range |
|
| Rear | 5.25 | Midbass / Full-Range |
|
1985 Dodge Ram 50 Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01985 Dodge Ram 50 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1985 Dodge Ram 50 features a front door panel speaker configuration that accepts 6x9 inch full-range drivers, which represents a relatively uncommon size for front door locations in this era of compact trucks.
- Rear positions accommodate 5.25 inch speakers with compatibility for both midbass and full-range types, offering some flexibility in component selection depending on whether the installer prioritizes bass extension or broader frequency coverage.
- Upgrading the front door panel speakers may provide the most noticeable improvement in sound quality, as the 6x9 inch format typically offers greater cone area and potential output compared to the smaller rear speakers.
- The single DIN radio opening suggests that aftermarket head unit installation would be straightforward with standard mounting kits, potentially allowing for modern features like Bluetooth connectivity and higher power output to drive upgraded speakers.
- Full-range speakers in the front position would handle all frequencies from a single driver, which may be preferable for maintaining simplicity while still achieving sound quality gains over factory paper cone speakers that have likely deteriorated over time.
- The combination of 6x9 inch front speakers and 5.25 inch rear speakers creates an unbalanced size configuration that might require careful amplifier fading or power distribution to achieve balanced staging across the cabin.
- Component speakers could potentially be installed in the rear 5.25 inch locations if midbass drivers are paired with separately mounted tweeters, though this would depend on available mounting points and the truck's interior configuration.