1991 Dodge Ram 50 Speaker Sizes
The 1991 Dodge Ram 50 speaker size chart provides factory speaker specifications and locations for replacement or aftermarket audio system upgrades. Information covers speakers positioned behind the seat, in the dashboard, and within the front door panel. Factory specifications assist in selecting compatible aftermarket speakers for audio system enhancement.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Behind Seat | 4 | Midrange |
|
| Dashboard | 4 | Midrange |
|
| Front Door Panel | 6x9 | Full-Range |
|
1991 Dodge Ram 50 Speaker Replacement Summary
3
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 2 High: 0Replacement priority:
High: 1 Medium: 2 Low: 01991 Dodge Ram 50 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1991 Dodge Ram 50 factory audio system integrates three distinct speaker locations, each serving different frequency response roles within the cabin acoustic environment.
- Front door panels accommodate 6x9 inch full-range speakers, which typically handle the broadest frequency spectrum compared to other factory positions in this configuration.
- Both dashboard and behind-seat positions utilize 4 inch midrange speakers, suggesting a factory design that emphasizes mid-frequency reproduction at multiple listening positions throughout the cab.
- The full-range 6x9 speakers in the door panels likely represent the primary sound source for bass frequencies, as the smaller 4 inch units lack sufficient cone area for low-frequency extension.
- Replacing the door panel speakers would generally provide the most substantial impact on overall sound quality, given their full-range capability and larger radiating surface area.
- The dual 4 inch midrange locations may create overlapping coverage patterns in the mid-frequency range, potentially affecting vocal clarity and instrumental definition depending on positioning relative to occupants.
- Aftermarket replacement options for the 4 inch locations remain limited compared to more common sizes, which could constrain upgrade paths for those positions.
- The single DIN radio opening follows standard dimensioning at 180mm x 50mm, maintaining compatibility with most aftermarket head units without modification to the dash structure.
- Component speaker systems could potentially utilize the existing door panel opening for woofer installation while relocating tweeters to optimize high-frequency dispersion.
- The absence of rear door speakers in this specification suggests a two-door cab configuration or intentional limitation of the factory audio system scope.