1984 Dodge Ramcharger Speaker Sizes
The 1984 Dodge Ramcharger factory audio system features specific locations for sound equipment. Front door panels accommodate 6x9 inch speakers, and the rear accepts 5.25 inch units. Midbass and full-range driver options serve as a compatible replacement and upgrade for the vehicle.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6x9 | Full-Range |
|
| Rear | 5.25 | Midbass / Full-Range |
|
1984 Dodge Ramcharger Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01984 Dodge Ramcharger Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1984 Dodge Ramcharger rear location accommodates 5.25 inch speakers, which can be replaced with either midbass drivers or full-range units depending on whether a separate tweeter is integrated into the audio system design.
- Front door panel positions utilize 6x9 inch speakers limited to full-range types, suggesting these locations handle the entire frequency spectrum without dedicated component separation in the factory configuration.
- Replacing the rear speakers with midbass drivers rather than full-range units would require adding separate high-frequency reproduction elsewhere in the cabin to maintain treble response.
- The front 6x9 inch openings provide larger cone area compared to the rear 5.25 inch positions, potentially offering greater bass output and overall volume capacity from the forward speakers.
- Full-range speakers in both locations would maintain frequency coverage across the audible spectrum, though component speakers with dedicated tweeters might improve stereo imaging and clarity if the system supports such a configuration.
- The single DIN radio opening follows the standard 2 inch height specification, allowing installation of most aftermarket head units without additional mounting adapters for size compatibility.
- Upgrading to higher sensitivity speakers in either location could increase overall output levels without requiring amplifier additions, though power handling capacity should match or exceed the head unit's output specifications.