1980 Ford F-150 Speaker Sizes
The 1980 Ford F-150 factory audio system features front door panels that accommodate 6.5 inch speakers, while rear door panels accept 6x9 inch units. Compatible speaker types for a replacement or upgrade consist of midbass and full-range options.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6x9 | Full-Range |
|
1980 Ford F-150 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01980 Ford F-150 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1980 Ford F-150 features round 6.5 inch openings in the front door panels, which typically accommodate either midbass drivers or full-range speakers depending on whether a component or coaxial configuration is selected.
- Rear door panel positions accept 6x9 inch oval speakers, a format commonly associated with full-range reproduction that can handle multiple frequency ranges without requiring separate tweeters or crossovers.
- Upgrading the front door speakers might be considered a higher priority than the rear positions, as front-mounted speakers contribute more directly to the soundstage and vocal clarity experienced by the driver.
- The truck supports both single DIN and double DIN radio installations, which may influence aftermarket head unit selection when planning stereo system improvements alongside speaker replacement.
- Full-range coaxial speakers would be a straightforward replacement option for both front and rear locations, requiring minimal modification while potentially offering noticeable improvements over deteriorated factory units.
- Component speakers could be installed in the front doors if the midbass drivers are paired with separately mounted tweeters, though this approach requires additional planning for tweeter placement and crossover installation.
- The 6x9 format in the rear typically provides greater cone area than round 6.5 inch speakers, which may contribute to enhanced bass response from those positions despite their rear-facing orientation.