2019 Ford F-150 Speaker Sizes
The 2019 Ford F-150 factory audio system features specific mounting locations that accept various components, pairing the a-pillar with a 1 inch speaker size, the center dash with 3.5 inch speakers, the front door panel with 6x9 inch units, and below the rear seat with 6.5 inch speakers. Compatible acoustic types function as a direct replacement and upgrade for the vehicle. These drivers include tweeters, full-range units, and midbass drivers.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| Below Rear Seat | 6.5 | Midbass / Full-Range |
|
| Center Dash | 3.5 | Full-Range |
|
| Front Door Panel | 6x9 | Full-Range |
|
2019 Ford F-150 Speaker Replacement Summary
4
total positions
1
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 1 Medium: 2 High: 1Replacement priority:
High: 1 Medium: 2 Low: 12019 Ford F-150 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2019 Ford F-150 utilizes a multi-location speaker configuration with tweeters positioned in the A-pillars, suggesting a factory sound design that attempts to create height in the soundstage through elevated high-frequency placement.
- Front door panels accommodate 6x9 inch full-range speakers, which typically offer better low-frequency response than circular drivers due to increased cone surface area, though mounting depth and magnet clearance should be verified before replacement.
- The center dash location features a 3.5 inch full-range speaker that likely handles mid-range frequencies and vocal clarity, though this size constraint may limit overall output capability compared to larger drivers.
- Below-rear-seat placement of 6.5 inch speakers could serve as either midbass reinforcement or rear fill, depending on the factory configuration, with the enclosed location potentially providing some acoustic loading benefits.
- Replacing the A-pillar tweeters might yield noticeable improvements in treble detail and stereo imaging, particularly if upgraded to silk dome or metal dome designs with higher sensitivity ratings.
- The dual radio size compatibility (Single DIN and Double DIN) provides flexibility for aftermarket head unit installation, which could enable better signal processing and amplification control for upgraded speakers.
- Front door speakers represent the primary sound source in most configurations, making them the logical first priority for upgrades when seeking improved tonal balance and dynamic range.
- Component speaker systems could potentially replace the front door full-range units and A-pillar tweeters with matched drivers, though crossover mounting locations would need consideration.