1980 Ford LTD Speaker Sizes
The 1980 Ford LTD speaker size chart provides factory specifications for replacement or aftermarket audio components. Information covers two speaker locations within the vehicle: front door panel and rear deck lid. Data assists with identifying correct specifications for factory system replacement or audio upgrade installations.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 5.25 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1980 Ford LTD Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01980 Ford LTD Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panel speakers in the 1980 Ford LTD could be replaced with either midbass drivers or full-range units, both utilizing the 5.25 inch mounting location. Midbass speakers would typically handle lower frequency ranges more effectively, while full-range speakers attempt to reproduce a broader spectrum from a single driver. The choice between these types would depend on whether the audio system includes separate tweeters or relies on individual speakers to cover all frequencies.
- The rear deck lid positions accommodate 6x9 inch full-range speakers, which were a common oval format in period vehicle audio installations. This larger surface area compared to the front speakers generally allows for greater cone excursion and potentially higher output levels, particularly in lower frequencies. The 6x9 configuration may contribute to the overall soundstage when positioned in the rear shelf area.
- Aftermarket speaker replacements for the 1980 Ford LTD would need to match the specific size requirements of 5.25 inch for front locations and 6x9 inch for rear positions. Modern replacement speakers in these sizes often feature improved materials such as polypropylene cones, rubber surrounds, and stronger magnet structures compared to original equipment, which could result in enhanced frequency response and power handling capabilities.
- The single DIN radio specification indicates a standardized head unit opening that measures approximately 2 inches in height and 7 inches in width. This standard sizing allows for replacement with contemporary aftermarket receivers that may include features such as digital signal processing, higher voltage preamp outputs, or equalization controls that were not available in factory radios from this period.
- Full-range speakers designated for both front and rear locations would need to reproduce frequencies across the audible spectrum without dedicated subwoofers or separate high-frequency drivers. The acoustic limitations of smaller speaker sizes often result in compromised low-frequency extension, particularly below 80-100 Hz, though this can vary based on enclosure design and speaker construction quality.