1997 Ford Probe Speaker Sizes
The 1997 Ford Probe speaker size chart provides factory speaker specifications for replacement or aftermarket upgrade purposes. Information includes speaker locations within the audio system, such as front door panel and rear side panel positions. Data covers stock speaker sizes installed at each location to assist with aftermarket component selection when replacing factory speakers or upgrading the sound system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 6x8 | Full-Range |
|
1997 Ford Probe Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 0 Low: 11997 Ford Probe Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1997 Ford Probe front door panel locations accommodate speakers with 6.5 inch mounting patterns, accepting either midbass drivers for component systems or full-range coaxial speakers for simpler installations.
- Rear side panel positions use 6x8 inch speakers configured as full-range units, representing a slightly larger footprint than the front locations.
- Component speaker systems could be installed in the front positions by pairing 6.5 inch midbass woofers with separate tweeters mounted elsewhere in the door or dashboard area.
- The different sizing between front and rear locations suggests factory designs often prioritized cost and space efficiency over uniform speaker sizing throughout the cabin.
- Full-range speakers in the rear positions typically handle the entire frequency spectrum from a single driver, though with potential limitations in extreme low and high frequencies compared to component configurations.
- Upgrading to aftermarket speakers in these locations could address common age-related degradation such as torn surrounds, weakened voice coils, or deteriorated cone materials that affect factory units.
- The single DIN radio opening provides standard 2 inch height clearance for head unit replacement, maintaining compatibility with most aftermarket receivers without dashboard modifications.
- Sound improvement from speaker replacement typically becomes noticeable when original factory units have experienced material fatigue or when upgraded speakers offer higher power handling and sensitivity ratings.