2008 Ford Taurus Speaker Sizes
The 2008 Ford Taurus factory audio system features specific mounting positions for various components. Front door panel and rear door panel locations accept 6x8 inch speakers, while the rear deck lid accommodates a 6x9 inch speaker size. Full-range drivers serve as compatible speaker types for an audio replacement and upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6x8 | Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
| Rear Door Panel | 6x8 | Full-Range |
|
2008 Ford Taurus Speaker Replacement Summary
3
total positions
3
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 3 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 2 Low: 02008 Ford Taurus Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2008 Ford Taurus contains three speaker locations with two different size specifications, utilizing 6x8 inch openings in both front and rear door panels while the rear deck lid accommodates larger 6x9 inch units.
- All factory positions accept full-range speaker configurations, which handle the entire audio frequency spectrum through a single driver unit rather than requiring separate components for different frequency ranges.
- The door panel locations share identical 6x8 inch mounting requirements, potentially simplifying the replacement process when sourcing aftermarket components since the same speaker model could be installed in all four door positions.
- The rear deck lid position provides the largest speaker opening at 6x9 inches, which may allow for improved bass response and overall sound output compared to the smaller door panel locations due to the increased cone area.
- Upgrading the door panel speakers might take priority during replacement since these positions typically provide more direct sound projection toward passengers than rear deck installations.
- The single DIN and double DIN radio compatibility suggests flexibility in head unit replacement options, with double DIN openings accommodating larger touchscreen interfaces if the factory configuration supports it.
- Full-range speaker compatibility across all positions indicates the factory system does not use separate component speakers with dedicated tweeters and woofers, which represents a common configuration in this vehicle segment.
- The 6x8 inch specification represents an oval format rather than round speakers, which may limit some aftermarket options compared to more common 6.5 inch or 5.25 inch round formats.