1988 Honda CRX Speaker Sizes
The 1988 Honda CRX factory audio system features front door panel and rear door panel locations that accommodate 6.5 inch speakers. Midbass and full-range units serve as compatible speaker types for audio replacement and upgrade procedures.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
1988 Honda CRX Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01988 Honda CRX Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1988 Honda CRX front and rear door panels accommodate 6.5 inch speakers, providing a uniform size throughout the cabin which may simplify speaker selection when upgrading multiple locations.
- Both front and rear positions accept midbass or full-range speaker types, offering flexibility in system configuration depending on whether separate tweeters and crossovers are used or if a simpler single-driver solution is preferred.
- Full-range speakers in these locations would handle all frequency reproduction through a single cone, while midbass drivers would typically focus on mid and lower frequencies as part of a component speaker setup.
- The door panel mounting locations may benefit from sound deadening material installation, as metal door skins can introduce resonance and vibration that affects speaker output quality.
- Single DIN radio compatibility allows for straightforward head unit upgrades with standard aftermarket receivers, which often provide improved power output and signal processing compared to factory units from this era.
- Midbass drivers in the 6.5 inch size typically reproduce frequencies from approximately 60-80 Hz up to around 4-5 kHz, though specific response varies by model and design.
- Component speaker systems would pair these door-mounted midbass drivers with separately mounted tweeters for high-frequency reproduction, creating a more detailed soundstage than full-range alternatives.
- The identical sizing front and rear suggests that identical speaker models could be installed throughout, though power distribution and crossover settings might differ depending on whether a fading configuration is desired.