2014 Honda Odyssey Speaker Sizes

The 2014 Honda Odyssey speaker size chart displays factory audio system specifications for all speaker locations throughout the vehicle. Information covers dashboard, center dash, d-pillar, overhead, front door panel, rear door panel, and rear side panel positions. Details include speaker specifications to assist with aftermarket replacement or upgrade planning for the factory audio system.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Speaker Details by Location
Location Size Type Notes
Center Dash 3 Midrange
  • Requires dashboard disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
D-Pillar 3 Midrange
  • Extremely difficult access
  • Professional service only
  • Low replacement priority
  • Replacement difficulty: high
Dashboard 1 Tweeter
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Overhead 3 Midrange
  • Requires headliner removal
  • Professional service only
  • Low replacement priority
  • Replacement difficulty: high
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low
Rear Side Panel 8 Woofer
  • Requires trim removal
  • Medium replacement priority
  • Replacement difficulty: medium

2014 Honda Odyssey Speaker Replacement Summary

7 total positions
2 easy to replace
1 high priority
2 professional only

Replacement difficulty:

Low: 2 Medium: 3 High: 2

Replacement priority:

High: 1 Medium: 3 Low: 3

2014 Honda Odyssey Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2014 Honda Odyssey contains seven distinct speaker locations distributed throughout the cabin, with sizes ranging from 1 inch tweeters to 8 inch woofers, suggesting a factory-installed premium audio configuration.
  • The dashboard houses a 1 inch tweeter, which typically handles high-frequency reproduction above 3-4 kHz and would be among the first candidates for replacement when upgrading the audio system due to the audibility of tweeter distortion.
  • Three separate 3 inch midrange positions exist in the center dash, d-pillar, and overhead locations, indicating a multi-point dispersion strategy for vocal frequencies that may contribute to improved sound staging in all seating rows.
  • Both front and rear door panels accommodate 6.5 inch speakers classified as midbass or full-range types, which suggests these locations handle the bulk of the frequency spectrum and would likely produce the most noticeable improvement when upgraded.
  • The rear side panel contains 8 inch woofers, which are typically dedicated to lower frequency reproduction and may require specific replacement units with appropriate power handling to maintain bass response.
  • Full-range 6.5 inch speakers in the door locations would reproduce frequencies across the audible spectrum, while midbass-specific replacements would focus on the 80-500 Hz range and typically require separate tweeters for complete frequency coverage.
  • The overhead 3 inch midrange position is somewhat uncommon in vehicle audio installations and may provide supplemental fill for rear passengers or contribute to surround sound effects in factory premium systems.
  • The radio supports both single DIN and double DIN head units, offering flexibility for aftermarket upgrades that could provide increased power output to drive higher-quality replacement speakers.
  • Tweeter replacement at the dashboard location may require specific mounting solutions or adapters due to the typically shallow depth available in dashboard installations.
  • The combination of dedicated woofers, midranges, and tweeters across seven locations suggests the factory system was designed for multi-way audio reproduction rather than a basic two-way configuration.