1995 Honda Prelude Speaker Sizes

The 1995 Honda Prelude factory audio system features dashboard locations that accommodate a 1 inch speaker size, while front door panel and rear deck lid locations accept 6.5 inch speakers. Compatible speaker types for a replacement or upgrade include tweeter, midbass, and full-range.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Dashboard 1 Tweeter
  • Requires panel disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Deck Lid 6.5 Midbass / Full-Range
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low

1995 Honda Prelude Speaker Replacement Summary

3 total positions
2 easy to replace
1 high priority
0 professional only

Replacement difficulty:

Low: 2 Medium: 1 High: 0

Replacement priority:

High: 1 Medium: 2 Low: 0

1995 Honda Prelude Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 1995 Honda Prelude uses 6.5 inch speakers in both the front door panels and rear deck lid, which suggests a focused approach to upgrading the main audio output locations with identically sized components.
  • Dashboard tweeters at 1 inch provide high-frequency output that could be enhanced with aftermarket units designed specifically for that frequency range.
  • Front door panel speakers would likely benefit from replacement before rear deck speakers, as front-stage audio typically contributes more directly to the listening experience in most automotive sound systems.
  • The availability of both midbass and full-range speaker options for the 6.5 inch locations allows for flexibility in choosing between dedicated frequency components or simpler full-range units.
  • Replacing the factory speakers with higher-sensitivity aftermarket models might improve overall output levels without requiring amplifier modifications.
  • The single DIN and double DIN radio compatibility indicates that head unit upgrades could be paired with speaker improvements to address both source quality and output performance.
  • Component speaker systems with separate tweeters and midbass drivers could potentially utilize the existing 1 inch tweeter locations while upgrading the 6.5 inch positions to dedicated midbass units.