2006 Honda S2000 Speaker Sizes
The 2006 Honda S2000 factory audio system features specific locations for sound reproduction components. Front door panel locations accommodate 1 inch units and 6.5 inch speakers, while roll bar locations accept a 3 inch speaker size. Available compatible speaker types for system replacement and upgrade include tweeter, midrange, midbass, and full-range.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Roll Bar | 3 | Midrange |
|
2006 Honda S2000 Speaker Replacement Summary
3
total positions
2
easy to replace
2
high priority
1
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 1Replacement priority:
High: 2 Medium: 0 Low: 12006 Honda S2000 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2006 Honda S2000 utilizes a three-way component speaker arrangement in the front door panels, separating frequencies across dedicated 1-inch tweeters, 6.5-inch midbass or full-range drivers, and supplementary 3-inch midrange units mounted in the roll bar location.
- Replacing the 6.5-inch door-mounted speakers would likely yield the most noticeable acoustic improvement, as these handle the majority of the frequency spectrum and contribute substantially to overall tonal character and bass response.
- The 1-inch tweeter positions in the door panels may benefit from aftermarket units with higher sensitivity ratings or silk dome construction to reduce harshness during high-volume playback.
- Roll bar-mounted 3-inch midrange speakers occupy an unconventional location that could affect soundstage imaging, though this placement may enhance rear passenger area coverage in open-top driving conditions.
- The single DIN radio opening provides standard aftermarket head unit compatibility without requiring dash modification or additional mounting hardware.
- Component speaker systems designed for three-way configurations would integrate directly with the existing mounting locations, though passive crossover networks may require custom installation points within the door cavities.
- The 6.5-inch midbass drivers potentially face power handling limitations if the factory units feature lower wattage ratings, which could restrict amplifier pairing options without speaker upgrades.
- Coaxial speakers in the 6.5-inch size category might not replicate the factory sound separation characteristics, as they consolidate tweeter and midbass elements into a single assembly rather than maintaining discrete positioning.