2004 Hummer H2 Speaker Sizes
The 2004 Hummer H2 speaker size chart provides factory speaker specifications and locations for replacement or upgrade purposes. Information includes audio system components in the a-pillar, b-pillar, front door panel, rear door panel, and center console. Data covers factory speaker details to assist with aftermarket installations and system modifications.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| A-Pillar | 1 | Tweeter |
|
| B-Pillar | 4 | Midrange |
|
| Center Console | 8 | Subwoofer |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2004 Hummer H2 Speaker Replacement Summary
5
total positions
2
easy to replace
1
high priority
2
professional only
Replacement difficulty:
Low: 2 Medium: 1 High: 2Replacement priority:
High: 1 Medium: 2 Low: 22004 Hummer H2 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The factory audio system in the 2004 Hummer H2 incorporates a multi-location speaker configuration with five distinct mounting positions, each serving a specific frequency range within the sound spectrum.
- The A-pillar locations accommodate 1-inch tweeters, which typically handle high-frequency reproduction above approximately 3,000 Hz, contributing to treble clarity and soundstage width.
- Mid-frequency content may be managed by the 4-inch midrange drivers positioned in the B-pillars, which would generally operate in the range between roughly 300 Hz and 5,000 Hz.
- Both front and rear door panels feature 6.5-inch speaker positions that accept either midbass or full-range drivers, offering flexibility in system design based on whether the installation utilizes component or coaxial configurations.
- The center console houses an 8-inch subwoofer location, suggesting the factory system includes dedicated low-frequency reinforcement rather than relying solely on door-mounted drivers for bass output.
- When replacing door panel speakers, component systems with separate tweeters and midbass drivers could potentially provide enhanced imaging compared to coaxial designs, though this would depend on the existing A-pillar tweeter utilization.
- The presence of dedicated B-pillar midrange positions indicates a more complex three-way configuration possibility, which may allow for smoother frequency transitions between drivers when properly configured with an appropriate crossover network.
- Upgrading the center console subwoofer to an aftermarket 8-inch unit with higher power handling and lower frequency extension could address low-end output limitations often present in factory audio installations.
- The radio opening accepts both single DIN and double DIN head units, providing compatibility with a wide range of aftermarket receivers that may offer improved amplification and signal processing capabilities.