2010 Hyundai Genesis Speaker Sizes

The 2010 Hyundai Genesis speaker size chart provides factory specifications for OEM audio system components across multiple locations. Information covers replacement speakers in the center dash, front door panel, rear deck lid, rear door panel, and rear deck center positions. Data includes aftermarket upgrade specifications for each factory location within the audio system.

As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.

Speaker Details by Location
Location Size Type Notes
Center Dash 1 Tweeter
  • Requires dashboard disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Center Dash 4 Midrange
  • Requires dashboard disassembly
  • Medium replacement priority
  • Replacement difficulty: medium
Front Door Panel 1 Tweeter
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Front Door Panel 2.5 Midrange
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Deck Center 8 Subwoofer
  • Requires shelf removal
  • Medium replacement priority
  • Replacement difficulty: medium
Rear Deck Lid 1 Tweeter
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low
Rear Deck Lid 4 Midrange
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low
Rear Door Panel 1 Tweeter
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low
Rear Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • Medium replacement priority
  • Replacement difficulty: low

2010 Hyundai Genesis Speaker Replacement Summary

10 total positions
7 easy to replace
3 high priority
0 professional only

Replacement difficulty:

Low: 7 Medium: 3 High: 0

Replacement priority:

High: 3 Medium: 7 Low: 0

2010 Hyundai Genesis Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2010 Hyundai Genesis factory audio system uses a multi-way speaker configuration with dedicated tweeters, midrange drivers, and midbass components distributed across multiple locations throughout the cabin.
  • Tweeters of 1 inch size are installed in four separate locations: the center dash, both front door panels, both rear door panels, and the rear deck lid, suggesting a focus on high-frequency dispersion.
  • The front door panels contain a three-way speaker setup consisting of a 1 inch tweeter, a 2.5 inch midrange driver, and a 6.5 inch midbass or full-range speaker.
  • Rear door panels feature a simpler two-way configuration with 1 inch tweeters paired with 6.5 inch midbass or full-range speakers.
  • The center dash location houses both a 1 inch tweeter and a 4 inch midrange driver, likely to enhance vocal clarity and soundstage imaging for front passengers.
  • The rear deck lid incorporates a 1 inch tweeter and a 4 inch midrange speaker, complementing the rear door speakers for passengers in back seating positions.
  • An 8 inch subwoofer is positioned in the rear deck center, providing low-frequency output for the 2010 Hyundai Genesis audio system.
  • Replacement speakers would need to match the specific size requirements at each location, with particular attention to the 2.5 inch midrange drivers in the front doors, which represent a less common size specification.
  • The 6.5 inch locations in both front and rear doors could accept either dedicated midbass drivers or full-range speakers, depending on whether the factory tweeter and midrange components are retained or replaced.
  • Component speaker systems with separate tweeters and woofers would be compatible with the existing multi-way architecture, potentially offering sound quality improvements over coaxial alternatives.
  • The factory radio opening accepts both single DIN and double DIN head units, providing flexibility for aftermarket receiver upgrades.