2001 Hyundai Tiburon Speaker Sizes

The 2001 Hyundai Tiburon factory audio system features front door panels that accept 6.5 inch speakers, and rear side panels that accommodate 6x9 inch units. A speaker size of 6.5 inches is common for a midbass replacement, while full-range choices serve as a standard audio upgrade.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Side Panel 6x9 Full-Range
  • Requires trim removal
  • Medium replacement priority
  • Replacement difficulty: medium

2001 Hyundai Tiburon Speaker Replacement Summary

2 total positions
1 easy to replace
1 high priority
0 professional only

Replacement difficulty:

Low: 1 Medium: 1 High: 0

Replacement priority:

High: 1 Medium: 0 Low: 1

2001 Hyundai Tiburon Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN or Double DIN 7"×2" or 7"×4" 180×50 or 180×100 Vehicle supports both radio sizes
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 2001 Hyundai Tiburon contains two speaker locations with different size configurations, suggesting a front-focused audio layout. The front door panels accommodate 6.5 inch speakers that can accept either midbass or full-range drivers, while the rear side panels use larger 6x9 inch full-range speakers.
  • Replacing front door speakers in the 2001 Hyundai Tiburon might take priority for sound improvement since these locations support both midbass and full-range configurations. This dual compatibility could allow for component system installations where separate tweeters handle higher frequencies while the door-mounted drivers focus on mid and lower ranges.
  • The rear side panel speakers use 6x9 inch sizing, which typically provides more cone area than circular drivers of similar width. This oval format may help with lower frequency response in the rear soundstage, though the specifications list these as full-range only without the midbass option available in front locations.
  • Full-range speaker compatibility exists at both front and rear positions, which could simplify a complete speaker upgrade using matched components. The front doors offer additional midbass capability that the rear panels do not, potentially creating different tonal characteristics between front and rear output if specific driver types are selected.
  • The radio mounting accepts both single DIN and double DIN head units, which may influence speaker upgrade planning. Double DIN aftermarket stereos often include more advanced signal processing and equalization features that could complement aftermarket speaker installations by allowing frequency adjustments tailored to the specific drivers installed.