1992 Infiniti G20 Speaker Sizes
The 1992 Infiniti G20 speaker size chart details factory speaker specifications and locations within the audio system. Information covers replacement speakers for front door panel and rear deck lid positions. Aftermarket upgrade options compatible with factory mounting locations are identified through OEM specifications and installation requirements for audio system components.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6x9 | Full-Range |
|
1992 Infiniti G20 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01992 Infiniti G20 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1992 Infiniti G20 features factory speaker locations in both the front door panels and rear deck lid, providing coverage across the cabin with two distinct size categories. The front positions accommodate circular 6.5 inch units while the rear location accepts oval 6x9 inch configurations.
- Front door panel speakers in the 6.5 inch size can function as either midbass drivers or full-range units depending on the system design. Midbass-specific drivers typically handle frequencies from approximately 80 Hz to 4 kHz, while full-range speakers attempt to reproduce a broader spectrum from bass through treble frequencies within a single cone assembly.
- The rear deck lid placement accepts 6x9 inch full-range speakers, which represent a larger radiating area compared to the front locations. This oval format generally provides increased bass output potential due to greater cone surface area, though the 1992 Infiniti G20 rear position may serve primarily as fill speakers in a front-biased soundstage.
- Replacement priority often begins with the front door panel locations since these positions handle the majority of midrange and midbass content where most musical information resides. The proximity of front speakers to occupants typically makes improvements in these positions more noticeable than changes to rear fill speakers.
- Full-range speaker types incorporate a single cone that attempts to reproduce bass, midrange, and treble frequencies without crossover division to separate drivers. This contrasts with component systems that divide frequency ranges among dedicated woofers, midrange drivers, and tweeters for potentially higher fidelity reproduction.
- The radio opening in this vehicle accepts both single DIN and double DIN head units, providing flexibility for aftermarket integration with modern source equipment. This compatibility range allows installation of basic receivers or touchscreen navigation units without dashboard modification requirements.
- Sound improvement potential exists through replacement of factory speakers with aftermarket units featuring higher power handling, lower resonant frequencies, and materials such as polypropylene or treated paper cones with rubber surrounds. Sensitivity ratings above 90 dB typically indicate greater efficiency in converting amplifier power to acoustic output.
- The combination of 6.5 inch and 6x9 inch positions creates a mixed-size system where tonal balance may require attention during replacement. Matching sensitivity and frequency response characteristics across front and rear speakers helps maintain consistent output levels and timbral quality throughout the listening environment.