2014 Infiniti Q60 Speaker Sizes
The 2014 Infiniti Q60 speaker size chart displays factory audio system specifications for replacement or aftermarket upgrade purposes. Information covers speaker locations in front door panels and rear door panels. Data includes specifications for OEM and aftermarket speakers compatible with the vehicle's factory audio system installations.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2014 Infiniti Q60 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 0Additional Notes
- The 2014 Infiniti Q60 uses 6.5 inch speakers in both front and rear door panels, which suggests a uniform approach to door-mounted audio throughout the cabin. This standardization may simplify the process of selecting aftermarket components when considering upgrades.
- Both midbass and full-range speaker types are compatible with the door panel locations. Midbass drivers typically handle frequencies from roughly 80 Hz to 500 Hz, while full-range speakers attempt to reproduce a broader frequency spectrum from a single driver. The choice between these types often depends on whether the audio system includes separate tweeters and crossovers.
- Door panel speakers in the 2014 Infiniti Q60 generally serve as primary sound sources for mid-frequency content and potentially higher frequencies if full-range units are installed. Replacing factory speakers with aftermarket alternatives of higher sensitivity ratings could potentially increase output levels without requiring additional amplification.
- The placement of speakers in door panels rather than dash locations typically positions sound sources lower in the soundstage. This configuration may benefit from component systems where separate tweeters can be mounted at ear level to improve imaging and stereo separation.
- Component speaker systems with external crossovers might offer advantages over coaxial designs in these locations, as they allow for better frequency distribution and potentially clearer sound reproduction. The 6.5 inch size provides adequate cone area for reasonable bass response within the physical constraints of door panel mounting depths.
- Aftermarket speaker installations in door panels often require attention to mounting depth specifications and may benefit from sound deadening materials applied to the door skin. These considerations can affect both fitment and acoustic performance in the listening environment.