1999 Jeep Cherokee Speaker Sizes
The 1999 Jeep Cherokee speaker size chart lists factory speaker locations and specifications for replacement or aftermarket audio system upgrades. Information includes speaker positions in overhead and front door panel areas. Data covers factory-installed specifications to assist with selecting compatible aftermarket speakers for audio system modifications.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Overhead | 6.5 | Full-Range |
|
1999 Jeep Cherokee Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
1
professional only
Replacement difficulty:
Low: 1 Medium: 0 High: 1Replacement priority:
High: 1 Medium: 0 Low: 11999 Jeep Cherokee Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panel location in the 1999 Jeep Cherokee accepts either midbass drivers or full-range speakers, which provides flexibility when prioritizing specific frequency reproduction versus broader sonic coverage.
- Overhead speaker positions are limited to full-range configurations, suggesting these locations may serve as primary listening positions or supplementary channels depending on the factory audio architecture.
- Both primary speaker locations utilize 6.5-inch mounting sizes, which standardizes replacement options and potentially simplifies the upgrade process when selecting aftermarket components.
- Full-range speakers at 6.5 inches typically handle frequencies from approximately 60Hz to 20kHz, though the upper bass response would depend on enclosure characteristics and door cavity volume.
- Selecting dedicated midbass drivers for the front door panels while retaining full-range speakers overhead could create a configuration that emphasizes vocal clarity and midrange presence from the lower positions.
- The choice between single DIN and double DIN head units affects available screen size and control interface options, though either configuration should integrate with the speaker locations without physical interference.
- Installing midbass-specific drivers in the doors would generally require supplementary tweeters or maintaining the overhead full-range speakers to reproduce higher frequencies adequately.
- Door panel installations at this size often benefit from added damping material to reduce panel resonance, which can affect clarity in the 80Hz to 250Hz range where midbass drivers operate most actively.