2017 Kia Niro Speaker Sizes
The 2017 Kia Niro factory audio system contains specific locations where the dashboard accommodates 1 inch speakers, the center dash supports 2.75 inch units, the front door panel and rear door panel accept 6.5 inch speakers, and the rear accommodates an 8 inch speaker size. Compatible speaker types for a replacement and upgrade include tweeter, midrange, midbass, full-range, and subwoofer.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Center Dash | 2.75 | Midrange |
|
| Dashboard | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear | 8 | Subwoofer |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2017 Kia Niro Speaker Replacement Summary
5
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 3 High: 0Replacement priority:
High: 1 Medium: 4 Low: 02017 Kia Niro Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2017 Kia Niro features a five-location speaker configuration spanning tweeters, midrange drivers, door panel speakers, and a rear subwoofer, suggesting a factory audio design that attempts to cover the full frequency spectrum through specialized speaker placement.
- The 1-inch dashboard tweeters handle high-frequency reproduction, while the 2.75-inch center dash midrange unit likely focuses on vocal clarity and mid-frequency response, creating a staging setup that may benefit from aftermarket upgrades to improve detail and imaging.
- Both front and rear door panels accommodate 6.5-inch speakers listed as midbass or full-range compatible, indicating these locations could accept either dedicated midbass drivers in a component system or coaxial full-range replacements depending on the installation approach.
- The 8-inch rear subwoofer position provides a factory low-frequency foundation that could be replaced with an aftermarket subwoofer to extend bass response and impact, though the physical location may influence enclosure options and available airspace.
- The radio accepts both single DIN and double DIN head units, offering flexibility for aftermarket receiver installations that might include built-in amplification, advanced equalization, or signal processing capabilities to support upgraded speakers.
- Replacing the door panel speakers first might yield noticeable improvements in overall clarity and volume handling, as these 6.5-inch locations typically reproduce the majority of musical content and tend to be the most audible during normal listening conditions.
- The combination of dedicated tweeters and a center midrange suggests the factory system may use a multi-way design in the front stage, which could be further developed with aftermarket component sets that provide matched drivers and external crossovers for improved frequency separation.