2013 Lincoln MKT Speaker Sizes
The 2013 Lincoln MKT factory audio system features front door panel and rear door panel locations that accommodate 6x8 inch speakers. Full-range drivers serve as a compatible replacement and upgrade for the vehicle.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6x8 | Full-Range |
|
| Rear Door Panel | 6x8 | Full-Range |
|
2013 Lincoln MKT Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02013 Lincoln MKT Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Lincoln MKT utilizes 6x8 inch full-range speakers in both front and rear door panels, suggesting a uniform speaker platform across all four doors that may simplify replacement planning when addressing multiple positions simultaneously.
- Full-range speakers in the door locations handle the entire frequency spectrum without separate tweeters or woofers, meaning replacement units would need to reproduce both high and mid-range frequencies through a single cone assembly.
- The 6x8 inch oval format represents a space-efficient design common in door panel installations, where the elongated shape fits into areas where round speakers might not accommodate the available mounting depth or width constraints.
- Aftermarket speaker selection would require matching the 6x8 inch footprint, though some mounting brackets exist to adapt 6.5 inch round speakers to this oval opening if preferred models are only available in circular configurations.
- Sound improvement potential depends largely on the power handling and sensitivity ratings of replacement speakers compared to the factory units, as the full-range design places all frequency reproduction demands on a single driver element.
- The single DIN radio opening indicates a standard-height head unit that measures approximately 2 inches tall, which provides compatibility with most aftermarket receivers without requiring dash modifications for double DIN installations.