2013 Mazda 5 Speaker Sizes
Information on replacement and upgrade options for factory audio components in a 2013 Mazda 5. The speaker size chart details specifications for aftermarket installations in front door panel and rear locations. Data covers factory system configurations and compatible aftermarket audio components for each speaker position.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6x8 | Full-Range |
|
| Rear | 6x8 | Full-Range |
|
2013 Mazda 5 Speaker Replacement Summary
2
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02013 Mazda 5 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Mazda 5 uses 6x8 inch speakers in both front door panels and rear locations, suggesting a uniform approach to audio component sizing throughout the cabin. This consistency may simplify the selection process when considering aftermarket options.
- Full-range speakers are specified for all positions, indicating that separate tweeters or dedicated high-frequency drivers were not part of the factory audio configuration. This design approach places the responsibility for reproducing the entire frequency spectrum on single speaker units.
- The front door panel speakers in the 2013 Mazda 5 could be prioritized for replacement, as these positions typically contribute most directly to the listening experience for front-seat occupants. The same 6x8 inch sizing in the rear positions offers the option for matching components if a complete system upgrade is desired.
- Component speakers with separate tweeters might offer enhanced high-frequency response compared to the factory full-range configuration, though such an upgrade would require mounting solutions for the additional drivers. Alternatively, coaxial designs could maintain the single-unit installation while potentially improving frequency separation.
- The 6x8 inch footprint allows for reasonable cone area compared to smaller round speakers, which may contribute to mid-bass output capabilities. This oval format was commonly used in door panel applications where space constraints prevented the use of larger round drivers.
- Sound improvement potential exists through aftermarket speakers that may feature higher sensitivity ratings, improved materials for cones and surrounds, or better power handling characteristics than the factory-installed units. The full-range requirement suggests that any replacement speakers should maintain broad frequency coverage.
- The radio cavity accepts both Single DIN and Double DIN head units, providing flexibility for audio source upgrades that could complement speaker replacements. This compatibility extends options for those considering integrated system enhancements.