2009 Mazda 6 Speaker Sizes
The speaker size chart for the 2009 Mazda 6 provides specifications for factory and aftermarket audio system components across multiple locations. Information covers replacement speakers in front door panels, dashboard, rear deck lid, and rear door panels. Details include factory speaker specifications and compatible aftermarket upgrade options for each audio system location within the vehicle.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 3.5 | Full-Range |
|
| Front Door Panel | 1 | Tweeter |
|
| Front Door Panel | 6x8 | Full-Range |
|
| Rear Deck Lid | 3.5 | Full-Range |
|
| Rear Door Panel | 6x8 | Full-Range |
|
2009 Mazda 6 Speaker Replacement Summary
5
total positions
4
easy to replace
2
high priority
0
professional only
Replacement difficulty:
Low: 4 Medium: 1 High: 0Replacement priority:
High: 2 Medium: 3 Low: 02009 Mazda 6 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2009 Mazda 6 factory audio system incorporates a component speaker arrangement in the front doors, separating high frequencies through dedicated 1-inch tweeters from the broader spectrum handled by 6x8-inch units in the lower door panels.
- Upgrading the 6x8-inch full-range speakers in both front and rear door panels would likely yield the most substantial improvement in overall sound quality, given their larger surface area and capacity to reproduce mid-range and bass frequencies more effectively than the smaller dashboard and rear deck units.
- The dashboard and rear deck lid positions both accommodate 3.5-inch full-range speakers, which typically handle mid-range frequencies but may struggle with deeper bass response due to their limited cone area.
- Component speaker systems designed for the front doors could replace both the existing 1-inch tweeters and 6x8-inch woofers, potentially offering better crossover design and frequency separation than the factory configuration.
- The 6x8-inch format, while less common than standard 6.5-inch or 6.75-inch round speakers, provides slightly more cone surface area within the factory mounting locations, which may contribute to improved bass output when paired with aftermarket units of similar dimensions.
- Coaxial speakers could serve as direct replacements for the 6x8-inch door panel locations, integrating tweeters into the same mounting footprint rather than maintaining the separate tweeter configuration.
- The single DIN and double DIN radio compatibility suggests flexibility for head unit upgrades, which could provide better power output and signal processing to support aftermarket speaker installations throughout the cabin.