1985 Mercedes-Benz 190E Speaker Sizes
The 1985 Mercedes-Benz 190E factory audio system features dashboard locations that accommodate 4 inch speakers, and rear deck lid locations that accept a 6.5 inch speaker size. Compatible replacement and upgrade speaker types include midrange, midbass, and full-range units.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4 | Midrange |
|
| Rear Deck Lid | 6.5 | Midbass / Full-Range |
|
1985 Mercedes-Benz 190E Speaker Replacement Summary
2
total positions
1
easy to replace
0
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 0 Medium: 2 Low: 01985 Mercedes-Benz 190E Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The dashboard speakers in the 1985 Mercedes-Benz 190E are typically designated for midrange frequencies, which often handle vocal reproduction and instrumental detail in the 300Hz to 5kHz range where human hearing is most sensitive.
- Component speaker systems might present an upgrade path for the rear deck locations, as the 6.5 inch openings could accommodate separate woofers paired with tweeters mounted elsewhere in the cabin.
- The 4 inch dashboard locations may benefit from replacement before the rear deck speakers, as midrange drivers tend to deteriorate faster due to exposure to sunlight and temperature fluctuations near the windshield.
- Full-range speakers in the rear deck position would need to reproduce both bass and treble frequencies from a single driver, whereas midbass speakers would focus on the 80Hz to 500Hz range and require supplementary tweeters for higher frequencies.
- The single DIN radio opening provides 180mm of horizontal space for aftermarket head units, which could introduce modern features like digital signal processing that may compensate for the limited bass output from smaller factory speaker sizes.
- Cone material selection for replacement speakers might affect tonal balance, with polypropylene cones offering durability in varying temperatures while materials like treated paper or composite blends could provide different sonic characteristics.
- Power handling capacity becomes relevant when replacing factory speakers, as aftermarket units with higher wattage ratings would require either an upgraded head unit or addition of a separate amplifier to realize their performance potential.
- The 6.5 inch rear deck speakers likely contribute the majority of bass response in the factory configuration, making their condition particularly important for maintaining lower frequency output without aftermarket subwoofer additions.