1996 Mercedes-Benz C220 Speaker Sizes
The 1996 Mercedes-Benz C220 speaker size chart provides factory audio specifications for replacement or aftermarket upgrade purposes. Information covers speaker locations within the vehicle, including front door panel and rear deck lid positions. Data includes sizes and specifications to assist with matching compatible aftermarket speakers to factory mounting locations in the audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 5.25 | Midbass / Full-Range |
|
1996 Mercedes-Benz C220 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01996 Mercedes-Benz C220 Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 1996 Mercedes-Benz C220 accommodate larger speakers than the rear deck lid, with 6.5 inch openings compared to 5.25 inch mounting points at the back, which could suggest that front speaker replacement might provide more substantial audio enhancement due to the increased driver surface area.
- Both locations accept midbass or full-range speaker types, indicating that the factory audio design likely relied on these positions to handle mid-frequency reproduction and potentially some bass response without a dedicated subwoofer configuration.
- The single DIN radio mounting in the 1996 Mercedes-Benz C220 provides a standard head unit cavity that would allow for aftermarket receiver installation if audio upgrades extended beyond speaker replacement alone.
- Full-range speakers at these sizes would typically cover frequencies from approximately 60-70 Hz up to 20 kHz, while midbass alternatives would focus on the 50-500 Hz range and would necessitate separate tweeters for high-frequency reproduction.
- The 6.5 inch front speakers could potentially deliver more low-end extension than the 5.25 inch rear units due to the larger cone excursion capability, though actual performance would depend on the specific aftermarket components selected and enclosure characteristics within the door panels.