2013 Mercedes-Benz E63 AMG Speaker Sizes
The 2013 Mercedes-Benz E63 AMG factory audio system utilizes specific locations to house various components. Front door panel and rear door panel locations accommodate 6.5 inch speakers. Midbass and full-range units serve as viable options for a replacement upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2013 Mercedes-Benz E63 AMG Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 02013 Mercedes-Benz E63 AMG Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Double DIN | 7"×4" | 180×100 | Double size for modern multimedia systems with large touchscreens |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2013 Mercedes-Benz E63 AMG utilizes 6.5 inch speakers in both front and rear door panel locations, offering consistency in driver and passenger audio output positioning.
- Door panel speakers in this configuration accept either midbass drivers or full-range units, providing flexibility when selecting replacement components based on the existing audio system architecture.
- Midbass drivers typically handle frequencies between approximately 80 Hz and 500 Hz, focusing on vocal clarity and instrumental body rather than extending into high treble ranges.
- Full-range speakers attempt to reproduce a broader frequency spectrum from a single driver, though they generally compromise in both bass extension and treble detail compared to component systems.
- The double DIN radio opening in the 2013 Mercedes-Benz E63 AMG allows for aftermarket head units measuring roughly 180mm x 100mm, which may support higher power output to replacement speakers than factory units.
- Replacing door speakers could address frequency response limitations, particularly if factory units exhibit reduced output in mid-range frequencies where vocals and many instruments reside.
- Component systems separating tweeters from midbass drivers often provide clearer stereo imaging than full-range speakers, though installation complexity increases with additional crossover networks.
- Aftermarket speakers with sensitivity ratings above 90 dB may produce noticeably higher volume levels than factory equivalents when driven by the same amplifier power.