2011 Mercedes-Benz S400 Speaker Sizes
The 2011 Mercedes-Benz S400 speaker size chart provides factory audio system specifications and locations for replacement or aftermarket upgrade purposes. Information includes speaker positions in front door panel and rear door panel areas. Data enables identification of compatible aftermarket speakers based on factory installation specifications within the vehicle's audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2011 Mercedes-Benz S400 Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 0Additional Notes
- The 2011 Mercedes-Benz S400 door panel speakers may benefit from replacement with component systems rather than coaxial full-range units, as midbass drivers paired with separate tweeters typically offer improved frequency separation and staging.
- Both front and rear door locations accept 6.5 inch speakers, which suggests a standardized approach to the audio system architecture across the cabin.
- Midbass-specific drivers in these positions would likely handle frequencies between approximately 80 Hz and 4 kHz, leaving upper frequencies to factory or aftermarket tweeters mounted elsewhere in the doors.
- Full-range speakers represent a simpler replacement option, though they generally compromise midbass output due to the need to reproduce higher frequencies through the same cone.
- The door panel locations typically provide better acoustic coupling for lower frequencies compared to dash-mounted speakers, making them primary contributors to overall sound quality.
- Aftermarket speakers with higher sensitivity ratings could produce increased output levels without requiring amplifier upgrades, though this depends on the factory head unit's power output capabilities.
- The specified size suggests factory speakers may use mounting depths between 2 and 3 inches, which would require verification before selecting replacement drivers with deeper baskets.