1989 Merkur XR4Ti Speaker Sizes
The 1989 Merkur XR4Ti speaker size chart details factory audio system specifications and locations for replacement or aftermarket upgrade purposes. Information includes speaker positions in the dashboard and rear deck lid areas. The chart provides reference data on original equipment audio components to assist with identifying compatible aftermarket speakers during system modifications or factory speaker replacements.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 5.25 | Full-Range |
|
| Rear Deck Lid | 5.25 | Midbass / Full-Range |
|
1989 Merkur XR4Ti Speaker Replacement Summary
2
total positions
1
easy to replace
0
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 1 High: 0Replacement priority:
High: 0 Medium: 2 Low: 01989 Merkur XR4Ti Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1989 Merkur XR4Ti front speaker locations accommodate full-range drivers at 5.25 inches, which could serve as the primary sound source for occupants.
- Rear deck speakers accepting both midbass and full-range configurations at 5.25 inches may provide flexibility in system design depending on whether a separate subwoofer is present.
- Dashboard-mounted speakers typically face upward or forward, potentially creating reflections off the windshield that influence staging characteristics.
- Full-range speakers in the dashboard position might handle mid-frequencies and treble reproduction without additional tweeters, though this depends on the specific driver design.
- The dual 5.25-inch sizing front and rear suggests a two-way configuration where rear deck speakers could reinforce bass output if midbass-specific drivers are installed.
- Single DIN radio compatibility indicates a standard 2-inch tall head unit opening, which was common for this era and remains compatible with many aftermarket receivers.
- Replacing dashboard speakers with higher sensitivity units could improve clarity at lower volumes, as dashboard locations often suffer from reflective surfaces and distance from listeners.
- Rear deck installations may benefit from sound deadening material on the metal deck surface to reduce vibration and panel resonance during bass reproduction.
- The absence of door speaker locations in the specifications suggests the factory audio system relied on dashboard and rear deck positions for coverage.
- Component speaker systems with separate tweeters might require custom mounting solutions since the dashboard locations are sized for full-range units.