1999 Mitsubishi Eclipse Speaker Sizes
The 1999 Mitsubishi Eclipse speaker size chart provides factory specifications and aftermarket replacement information for audio system locations throughout the vehicle. Details include dashboard, front door panel, and rear side panel speaker configurations. The chart assists with identifying appropriate upgrade options and compatible aftermarket speakers that match original factory installations for enhanced audio performance.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4 | Midrange |
|
| Dashboard | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 5.25 | Midbass / Full-Range |
|
1999 Mitsubishi Eclipse Speaker Replacement Summary
4
total positions
1
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 1 Medium: 3 High: 0Replacement priority:
High: 1 Medium: 2 Low: 11999 Mitsubishi Eclipse Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 1999 Mitsubishi Eclipse contains four distinct speaker locations with varying sizes, suggesting a multi-way audio system design that separates frequency ranges across different driver types.
- Dashboard speakers split into 1-inch tweeters and 4-inch midrange drivers, indicating a factory configuration that attempted to reproduce higher frequencies separately from midrange content.
- Front door panels accommodate 6.5-inch drivers designated for midbass or full-range applications, while rear side panels utilize smaller 5.25-inch drivers for similar purposes, creating a size differential between front and rear locations.
- The tweeter position likely handles frequencies above approximately 3-4 kHz, though actual crossover points would depend on the specific factory or aftermarket setup being used.
- Replacing front door speakers might yield more noticeable improvements to overall sound quality compared to rear locations, given the larger cone area available for moving air and reproducing lower frequencies.
- The 4-inch midrange drivers could prove challenging to replace with direct aftermarket equivalents, as this size category receives less attention from speaker manufacturers compared to the more common 6.5-inch and component tweeter formats.
- Full-range replacement speakers in the 6.5-inch door positions would need to reproduce frequencies typically handled by both the separate tweeters and midrange drivers to maintain similar coverage in a simplified two-way configuration.
- Component speaker systems might integrate better with the 1999 Mitsubishi Eclipse existing multi-location layout, allowing dedicated tweeters to remain in dashboard positions while larger woofers occupy door panels.
- The dual radio compatibility (Single DIN and Double DIN) provides flexibility for head unit upgrades that could supply more power to aftermarket speakers than the factory radio likely provided.
- Coaxial speakers in the 6.5-inch and 5.25-inch locations would incorporate their own tweeters, potentially creating frequency overlap with the dashboard-mounted 1-inch drivers unless the smaller speakers were disconnected or the system retuned.