2011 Mitsubishi Endeavor Speaker Sizes
The 2011 Mitsubishi Endeavor factory audio system includes specific mounting locations. The dashboard accommodates a 1 inch speaker size, while the front door panel and rear door panel accept 6.5 inch speakers, and the rear side panel supports an 8 inch unit. Compatible speaker types for a replacement or upgrade consist of tweeters, midbass, full-range units, and woofers.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Side Panel | 8 | Woofer |
|
2011 Mitsubishi Endeavor Speaker Replacement Summary
4
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 2 High: 0Replacement priority:
High: 1 Medium: 2 Low: 12011 Mitsubishi Endeavor Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2011 Mitsubishi Endeavor features a four-location speaker system with tweeters in the dashboard, 6.5-inch positions in both front and rear doors, and 8-inch woofers in the rear side panels.
- Dashboard tweeters measure 1 inch and handle high-frequency reproduction in the factory audio configuration.
- Both front and rear door panels accommodate 6.5-inch speakers that can accept either midbass drivers or full-range units depending on the desired audio setup.
- The rear side panel positions support 8-inch woofers for low-frequency output.
- Replacing the front door speakers would likely provide the most noticeable sound quality improvement, as these locations handle the majority of the audible frequency spectrum for front-seat listeners.
- Full-range speakers in the door positions would eliminate the need for separate crossovers, while midbass drivers would require the factory tweeter system to remain functional for high frequencies.
- The 8-inch rear woofers could enhance bass response if replaced with aftermarket subwoofers designed for rear panel mounting.
- The single DIN radio opening allows for standard head unit replacements without requiring additional mounting adapters for double DIN units.
- Upgrading door speakers to component systems would utilize the existing 1-inch tweeter locations, though custom mounting may be necessary depending on aftermarket tweeter specifications.