2010 Mitsubishi Lancer Speaker Sizes
A speaker size chart for the 2010 Mitsubishi Lancer provides factory specifications and locations for the audio system components. Information covers replacement and aftermarket upgrade options for speakers positioned in the front door panel, rear door panel, and rear areas. The chart details which speaker types are installed at each location within the vehicle's factory audio system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 1 | Tweeter |
|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear | 10 | Subwoofer |
|
| Rear Door Panel | 1 | Tweeter |
|
| Rear Door Panel | 6.5 | Midbass / Full-Range |
|
2010 Mitsubishi Lancer Speaker Replacement Summary
5
total positions
4
easy to replace
2
high priority
0
professional only
Replacement difficulty:
Low: 4 Medium: 1 High: 0Replacement priority:
High: 2 Medium: 3 Low: 02010 Mitsubishi Lancer Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The 2010 Mitsubishi Lancer features a factory audio configuration that includes separate tweeters and larger speakers in both front and rear door locations, suggesting a component-style arrangement where high frequencies and mid-range frequencies are handled by dedicated drivers.
- Replacement speakers for the door panels would typically focus on the 6.5 inch positions first, as these handle the majority of the audible frequency spectrum and tend to show the most noticeable degradation over time compared to the smaller 1 inch tweeters.
- The presence of 1 inch tweeters in all four door panels indicates that the factory system may have been designed with basic sound staging in mind, directing higher frequencies toward occupants from multiple points within the cabin.
- Full-range speakers could be installed in the 6.5 inch locations as an alternative to midbass drivers, which might simplify the replacement process for those not retaining or upgrading the factory tweeter system.
- The 10 inch subwoofer location in the rear suggests that low-frequency reinforcement was part of the original audio design for the 2010 Mitsubishi Lancer, though aftermarket options in this size category vary widely in power handling and enclosure requirements.
- Both Single DIN and Double DIN radio compatibility provides flexibility for head unit upgrades, with Double DIN units typically offering larger displays and more advanced interface options than their Single DIN counterparts.
- Component speaker systems with separate tweeters and midbass drivers would align well with the factory configuration, potentially using the existing tweeter mounting points while upgrading the 6.5 inch positions with higher quality midbass units.
- The rear door panel speakers at 6.5 inches may contribute less to overall sound quality than front speakers in typical listening scenarios, as most audio staging prioritizes the front soundstage for driver and front passenger experience.