1992 Mitsubishi Precis Speaker Sizes
The 1992 Mitsubishi Precis speaker size chart displays factory audio system specifications for replacement or aftermarket upgrade purposes. Information includes speaker locations within the vehicle, such as dashboard and rear side panel positions. Factory specifications are provided to assist with selecting compatible aftermarket audio components for the existing system.
As an Amazon Associate, we may earn a commission from purchases made through links marked. Read more in our disclaimer.
| Location | Size | Type | Notes |
|---|---|---|---|
| Dashboard | 4 | Midrange |
|
| Rear Side Panel | 5.25 | Midbass / Full-Range |
|
1992 Mitsubishi Precis Speaker Replacement Summary
2
total positions
0
easy to replace
0
high priority
0
professional only
Replacement difficulty:
Low: 0 Medium: 2 High: 0Replacement priority:
High: 0 Medium: 1 Low: 11992 Mitsubishi Precis Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN | 7"×2" | 180×50 | Standard size for basic car radios with small display or no display |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The dashboard speakers in this vehicle are limited to 4-inch midrange drivers, which handle the mid-frequency portions of the audio spectrum but may lack the ability to reproduce deep bass or the highest treble frequencies without additional components in the system.
- Rear side panel locations accommodate 5.25-inch speakers that can function as either midbass drivers or full-range units, offering flexibility in system configuration depending on whether the installer prioritizes low-frequency extension or complete frequency coverage from a single driver.
- The 1992 Mitsubishi Precis uses a single DIN radio format, which is a standardized head unit size that facilitates straightforward replacement with aftermarket receivers while maintaining proper fit in the factory opening.
- Upgrading the factory dashboard speakers may be a lower priority compared to the rear panel positions, since 4-inch midrange drivers typically contribute less to overall system output and bass response than larger speakers in other locations.
- The rear 5.25-inch positions could potentially serve as the primary sound source in the 1992 Mitsubishi Precis if full-range speakers are selected, though dedicated midbass drivers paired with separate tweeters might provide better separation of frequency ranges.
- Speaker replacement in the dashboard location requires selecting units specifically designed for midrange duties, as attempting to install full-range drivers in 4-inch openings often results in compromised bass performance due to the physical limitations of smaller cone areas.
- The combination of small dashboard speakers and 5.25-inch rear units suggests that substantial improvements in bass output would likely require the addition of a subwoofer, as neither factory location is optimized for low-frequency reproduction below approximately 80-100 Hz.
- Aftermarket speaker selection for the rear positions should consider impedance compatibility with the head unit, as mismatched impedance can result in reduced power transfer or potential damage to amplification components.