1980 Nissan 200SX Speaker Sizes

The 1980 Nissan 200SX factory audio system includes front door panel and rear deck lid locations that accommodate 6.5 inch speakers, establishing a baseline speaker size. Midbass and full-range units serve as compatible speaker types for audio replacement and upgrade procedures.

Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.

Speaker Details by Location
Location Size Type Notes
Front Door Panel 6.5 Midbass / Full-Range
  • Standard installation
  • High replacement priority
  • Replacement difficulty: low
Rear Deck Lid 6.5 Midbass / Full-Range
  • Access through trunk
  • Medium replacement priority
  • Replacement difficulty: low

1980 Nissan 200SX Speaker Replacement Summary

2 total positions
2 easy to replace
1 high priority
0 professional only

Replacement difficulty:

Low: 2 Medium: 0 High: 0

Replacement priority:

High: 1 Medium: 1 Low: 0

1980 Nissan 200SX Radio Slot Size (DIN)

DIN Type Size (inch) Size (mm) Notes
Single DIN 7"×2" 180×50 Standard size for basic car radios with small display or no display
  • Always measure the slot before purchasing a new radio
  • Check slot depth - it may vary

Additional Notes

  • The 1980 Nissan 200SX front door panels accommodate 6.5 inch speakers, which can accept either midbass or full-range driver types depending on the audio system configuration desired.
  • Rear deck lid locations in the 1980 Nissan 200SX also utilize 6.5 inch openings, offering the same midbass or full-range compatibility as the front positions.
  • The uniform 6.5 inch sizing across both front and rear locations may simplify component selection when planning audio upgrades, as identical speaker models could potentially be installed throughout the vehicle.
  • Full-range speakers would handle the entire frequency spectrum from a single driver, while midbass types typically focus on mid and low frequencies and often require separate tweeters for high-frequency reproduction.
  • The single DIN radio opening provides standard aftermarket head unit compatibility, which could facilitate integration with modern audio sources and amplification options.
  • Midbass speakers in these locations might provide improved low-frequency response compared to full-range alternatives, though this would likely necessitate additional high-frequency drivers to maintain balanced sound across the audio spectrum.
  • The 6.5 inch format represents a widely available speaker size, which may offer numerous aftermarket options across various price points and performance levels.