1996 Nissan Maxima Speaker Sizes
The 1996 Nissan Maxima factory audio system includes specific mounting locations. The front door panel accommodates 6.5 inch speakers, and the rear deck lid supports a 6.75 inch speaker size. Midbass and full-range units serve as compatible speaker types for an audio replacement and upgrade.
Specific details regarding locations, speaker sizes, and types are outlined in the compatibility chart.
| Location | Size | Type | Notes |
|---|---|---|---|
| Front Door Panel | 6.5 | Midbass / Full-Range |
|
| Rear Deck Lid | 6.75 | Midbass / Full-Range |
|
1996 Nissan Maxima Speaker Replacement Summary
2
total positions
2
easy to replace
1
high priority
0
professional only
Replacement difficulty:
Low: 2 Medium: 0 High: 0Replacement priority:
High: 1 Medium: 1 Low: 01996 Nissan Maxima Radio Slot Size (DIN)
| DIN Type | Size (inch) | Size (mm) | Notes |
|---|---|---|---|
| Single DIN or Double DIN | 7"×2" or 7"×4" | 180×50 or 180×100 | Vehicle supports both radio sizes |
- Always measure the slot before purchasing a new radio
- Check slot depth - it may vary
Additional Notes
- The front door panels in the 1996 Nissan Maxima accommodate 6.5 inch speakers that function as either midbass drivers or full-range units, while the rear deck lid positions accept slightly larger 6.75 inch speakers with the same functional capabilities.
- Midbass speakers typically handle frequencies from approximately 80 Hz to 500 Hz, reproducing lower midrange content and upper bass notes, whereas full-range speakers attempt to cover the entire audible spectrum from bass through treble in a single driver design.
- The rear deck lid speakers present a modest size increase of 0.25 inches compared to the front positions, which may allow for marginally improved low-frequency extension or increased surface area for sound radiation.
- Component speaker systems separating tweeter and woofer elements could be installed in the front door locations of the 1996 Nissan Maxima, potentially providing enhanced stereo imaging and frequency separation compared to coaxial full-range alternatives.
- The compatibility with both midbass and full-range types suggests flexibility in system configuration, allowing either a dedicated component setup with external crossovers and separate tweeters or simpler coaxial replacements.
- Power handling capacity and sensitivity ratings become relevant considerations when selecting replacement speakers, as these parameters influence maximum output levels and amplification requirements.
- The radio opening supports both single DIN and double DIN head unit configurations, offering options for aftermarket source unit upgrades with varying feature sets and integrated amplification capabilities.
- Impedance matching between replacement speakers and the existing factory amplification or aftermarket head unit affects damping factor and power transfer efficiency throughout the audio reproduction chain.